Packaging & Delivery
| Packaging Details: |
Carton or standard factory package. |
| Delivery Detail: |
Seven working days for delivery or according to user needs |
Specifications
High Accuracy LCD display analog pressure transmitter (HART)
With advanced, mature, reliable Piezoresistive Silicon Sensors
High Accuracy LCD display analog pressure transmitter (HART)
![]()
Feature
1.Support lots of protocols
2.High accuracy, better reliability and intrinsically safety
3.Accuracy: ±0.075% (20°C, range rate10:1)
4.Support EDD, GSD and DTM
5.EMC: According to IEM61326
6.Protection degree: IP67EDD , GSD and DTM
General Introduction
NCS-PT105ⅡS series Smart Pressure Transmitter with advanced, mature, reliable Piezoresistive Silicon Sensors has been designed meticulously by com bining advanced microprocessor technology and digital capacitance measurement techniques.
The powerful functions and high-speed computing capability of the microprocessor make it have excellent qualifications such as intelligent, high-precision, high reliability, stable zero and so on. Its LCD can display many physical parameters such as pressure, temperature, current. It can be realized zero adjustment, range settings and other features by key-press operation, and easy to on-site tests.
NCS-PT105ⅡS series Smart Pressure Transmitter supports HART, FF, Profibus PA, Profibus DP protocol and can measure pressure, differential pressure, liquid level, flow, and other industrial parameters. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc.
Model Selection of NCS-PT105IIS Pressure Transmitter (Piezoresistance Silicon Sensor)
|
Model
|
Pressure type
|
|
NCS-PT105ⅡS SG
|
Gauge pressure transmitter
|
|
NCS-PT105ⅡS SA
|
Absolute pressure transmitter
|
Basic Parameter
|
Measure object
|
liquid,gas,stream
|
|
Power
|
9-32V dc(FF,PA)
9-17.5VDC(FF,PA; explosion-proof)
11.9-42VDC(HART)
11.9-30VDC(HART; explosion-proof)
|
|
Output
|
Analog:2 wire 4~20mA
Digital:HART,FF and PA signal
|
|
Load resistant
|
0~1500ohm(common)
250~550ohm(use HART)
|
|
Insulation
|
Voltage between terminal and housing:500Vrms(707VDC)
|
|
Display
|
Optional 6 bits digital number or 5 bits characters LCD display
|
|
Temperature
|
Work temperature: -40 ~ 85°C(without display)
-30 ~ 70°C(with display)
-30 ~ 60°C (explosion-proof IC)
Store temperature: -40 ~ 100°C(without display)
-40 ~ 85°C(with display)
|
|
Humidity scale
|
5%~100%RH
|
|
Start time
|
≤ 5 seconds
|
|
Refresh time
|
0.2 seconds
|
|
Dump adjusting
|
Constant of time 0~15 seconds
|
Performance specification
|
Precision
|
±0.075% of the select range. If the select range <1/10 maximum of the
range, the precision is ±[0.025+0.005×(maximum range/select range)]%
of select range
|
|
Temperature effect
|
Effect of every change of 28°C(50°F)
Select range ≥0.1 maximum range:±[0.019% of maximum range +0.125% of select range] ;
Select range <0.1 maximum range:±[0.025% of maximum range+0.125% of select range].
|
|
Long time stability
|
In 12 months, ±0.1% of maximum range
|
|
Static pressure effect
|
±0.25%/13.8MPa of maximum range
|
|
Location installed effect
|
The maximum of the zero point movement is 0.24kPa
|
|
Power effect
|
< 0.005%/V of range calibrated
|
|
Explosion-proof
|
intrinsically safety Ex ia II C T4
|
|
Proof level
|
IP65
|
|
Vibration effect
|
IEC 60068-2-6 Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)
|
|
Electromagnetic compatibility
|
IEC 61000-4-2 Electromagnetic compatibility (EMC)- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3 Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
IEC 61000-4-4 Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
IEC 61000-4-6 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
IEC 61000-4-8 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
|
Physical specification
|
Electrical connection
|
1/2-14 NTP Female
|
|
Weight
|
1.6kg (with LCD)
1.0kg (without LCD)
|
Microcyber Corporation
Basic Information
Business Type:
Main Products:
Location:Floor 1-3, Building 1, No. 17-8, Wensu Street, Hunnan New Area, Shenyang, Liaoning, China (Mainland) Zip: 110179
Total Employees: 101 - 200 People
Year Established: 2003
Trade Information
Top 3 Markets:
Accepted Payment Currency:
Nearest Port:
Average Lead Time:
Overseas Office: No
Company Pictures
Verified Supplier
Credit Check