Specifications

3 science and technology new patent of invention
Golden supplier of alibabaexportimescheck
Passed the ISO9001-2008 QUALITY CERTIFICATION

 Installation

Assembling process of the set of wire thread insert

1. hole

with 2 form , 3 form listed do standard bit hole , hole depth greater than or mean t1, notice that don’t bore the hole into the toper, it may cause the place to damage that the smear metal mustn’t be fallen into ,is it go hu hole , burr of nature to let to seek to permit after holing , hu hole does not should exceed 0.4p depth , is not greater than the installation of the silk set after hu hole..

2. tapping

take corresponding silk suits of special-purpose screwtap tapping of specification , length of tapping must exceed silk a length , as to the thing that it is open hole take tappings,user according to necessary in precision, spiral shell of hole , choose the tapping method and lubricated way properly, should exert oneself properly at the time of blind hole tapping , in case the screwtap is broken, should clear up the hole of the whorl after tapping, can blow by compressing the air spray gun, the blind hole should also use the long spray gun with radial hole to clear up on two downwards , can clear up with method that is washed too.

3. install the insert one

use the manual installation tool to install the silk one in general cases.insert is it install tool to put, make installation handle is it lead pole in the trough, rotate installation handle make silk suit fasten into the hole to imbed ,is it leave 1/4-3/4 empty whorl from surface altogether to make.And more than 14*2 thick tooth silks can adopt “T”type to slot at the time of a set of installation or the simple and easy tool of very beginning of whorl is installed while installing the silk on a small quantity , but should not add greater axial force in case deduct arbitrarily.

4. break and install handles

at the ope