PC Series Hammer Crusher on Hot Selling

 

Introduce Of Hammer Crusher

 

Hammer mill (hammer crusher) is mainly applied to low abrasion materials with medium hardness and compression strength not exceed 100Mpa. Such as coal, salt, chalk, gypsum, bricks, tiles, limestone, etc. It is also used to crush wood chips with strong fiber structure and tenacity, and the waste from asbestos cement to recycle asbestos fiber, etc. In addition, hammer crusher can be not only applied in crushing line and sand production line, but also applied instead of cone crusher.

 

 Advantages and Features

 

1. high capacity, high crushing ratio
2. uniform particle size, simple structure
3. Low investment, easy management and maintenance.

 

Working principle of hammer mill

 

Hammer mill mainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: upper part and lower part which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of the turn plate, pin shafts, and hammers which are grouped regularly in the main shaft. The motor drives the rotors to rotate quickly in the crushing cavity, and hammers spread outward as a result of centrifugal force from the rotation of the rotors.

 Large materials entering the crusher through the feed inlet are stricken, impacted, cut and ground by the high-speed hammers to small size. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size.

The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement.

 

Technical Data of Hammer Crusher

 

Model	PC400x300	PC600x400	PC800x600
Rotor diameter /mm	400	600	800
Rotor length /mm	300	400	600
Rotor speed r/min	1100	1000	900
Max. feeding size /mm	<100	<220	<350
Ouput size /mm	5-10	5-15	5-20
Capacity T/h	5-13	10-20	18-30
Motor power /KW	11	18.5	45
Number of hammer /piece	16	20	28
Weight /T	0.8	1.8	2.8
Overall dimension L*W*H/mm	900*670*860	1200*1050*1200	2360*1490*1415

 

 

 

 

 

 

Shanghai Clirik Machinery CO., LTD.

Basic Information

Business Type:Business Service

Main Products:mine grinding mill

Location:No.19 Fuqing Rd, Pudong New Area, Shanghai,China

Total Employees: 100-500

Year Established: 1995

Trade Information

Top 3 Markets:

Accepted Payment Currency:

Nearest Port:

Average Lead Time:

Overseas Office: No

Company Pictures

Visit Minisite