Reverse osmosis, the raw water, first goes by pre-treatment, then by RO treatment. Through those treatments, can remove dissolving salt 99% and harmful materials, like particle, colloid, organic impurities, heavy metal ions, bacteria, viruses and heat source, etc. the system salt rejection rate gets 96-98%, outlet water conductivity gets ≤10μs/cm².

Process:

Raw water+ Raw water tank +Raw water pump+Quartz sand Filter + Activitated carbon Filter + Scale inhibitor system +Ultrafilter+High Pressure  Pump+ Reverse Osmosis Host System + Pure Water Tank

Parameters:

1. Capacity: customized

2. Rated power: check with the configuration list

3. Voltage: 220V/3phase/50Hz, 380V3phase/50Hz,or customized at different country

4. Desalting rate:97-98%

5. Water recovery rate: 50-70%

6. Conductivity of raw water: ≤400μs or custom designed

7. Conductivity of pure water: ≤10μs or custom designed

Function:

1. Manually and automatically wash RO membrane, CIP system

2. Manually wash RO membrane with chemicals on machine,

3. Automatic shut-down at tank full,

4 .SS high pressure components, SS pump to avoid the leakage.

5. Multi-stage pumps protect the machine when lack of water,

6. Protection in such cases as no power, lower pressure, higher pressure, shot circuit, creepage, etc.

System capacity changes significantly with water temperature and feed TDS, for higher TDS,a water analysis must be supplied and could result in modifications to the system.