Uplifted driven: Teeth bar Instead of traditional steel wire. 

ZKRM-TB Series are also made of stainless steel.

Simple structure, easy operation, easy maintenance etc.

The machine could be disassembled, and it's easy for moving and transporting from one place to another place.

Our upright poles is same thickness and shape, the upper end won't be bended if the wall is too high.

The upright poles are made of stainless steel, and the machine is made of stainless steel as well.

Accurate positioning: position on a average height point, which makes the rendered wall are same thickness.

We have a time delay device and two vibrators on each machine, it can render the wall and end of the wall perfectly and successfully, with less errors.

The feeding motor could be stopped when there is a window or door (don't need to render).

Each machine will be tested before ex-factory.

The two upright poles could be lifted by clutch via Hydraulic. If the ground is uneven, the hydraulic could be adjusted automatically, then the pole side where the ground is lower w